1、 What is a draft beer machine used for

The draft beer machine is the main component of the barreled beer distribution system, which is a type of equipment that quickly cools the beer flowing through the beer tube through a built-in compressor refrigeration system. It belongs to the category of beer beverage equipment

1. Quickly cool down the draft beer to relieve heat and cool down. The draft beer machine can quickly reduce the temperature of draft beer at room temperature in summer to 3-8C. In scorching summer days, when the heat is unbearable, drinking a cup of cool draft beer appropriately will cool your heart and dissipate the heat.

2. Improve the quality of draft beer and enhance its taste. In summer, the temperature is very high, and draft beer at room temperature can also become very hot in barrels, reducing the taste. If consumed directly, it will feel warm and swallowed, making it unpleasant to drink. After being pressurized by carbon dioxide and cooled by the draft beer machine, the draft beer will become fresh and sweet. When poured into the cup, the fragrance will hit people, the foam will be delicate, and the taste in the mouth will be excellent. After several cups, you will feel relaxed, happy, ethereal, and enjoy life. It is also one of the reasons why draft beer machines are popular worldwide.

3. Ordinary bottled beer and canned beer, after freezing, will destroy the nutritional components of the beer, causing the protein in the liquor to decompose and dissociate. At the same time, freezing can cause volume expansion, increase air pressure, and easily cause bottle breakage, causing injury. The draft beer machine has overcome the above defects and achieved the purpose of refrigeration Usage of draft beer machine

1. After dismantling the packaging, remove the main machine and accessories of the draft beer machine (wine head column, distributor, CO2 pressure reducer, transparent wine tube, reinforced hose, closure card, etc.). Fill the water tank of the draft beer machine with clean tap water until the evaporator and stainless steel coil are submerged. Be careful not to add too much water to prevent the water tank from overflowing after freezing.

2. After removing the packaging of the wine column, remove the fixing nut at the bottom of the wine column, and insert the fixing screw of the wine column into the corresponding hole on the top cover of the machine. After installing the wine column fixing nut, lock the wine column tightly. Insert the closure card into the transparent wine tube, use hot water at around 70 ° C to soften the end of the wine tube, and then insert the double ended draft beer machine into the outlet of the stainless steel coil, at least inserting it

3cm, lock the closing card tightly. 3. Connect the wine tube, slide the closing card onto the transparent wine tube, and use a small self brewed fresh beer machine to soften the soup in the wine tube with hot water of about 70C. Insert the closing card into the outlet and inlet of the dispenser respectively. The draft beer machine will lock the closing card tightly. Air pipe connection: Insert the closed clamp onto the reinforced hose, insert it into the inlet of the distributor and the low-pressure outlet of the CO2 pressure reducer of the draft beer machine, and lock the closed clamp tightly. The alcohol can only be sold after being powered on and the refrigeration system operates for 1 hour.

4. Align the weir nut of the CO2 pressure reducer with the steel cylinder joint, rotate the nut, and tighten it with a wrench. Turn the pressure regulating knob counterclockwise to the end, open the steel cylinder of the double ended draft beer machine, and slowly rotate the pressure regulating knob clockwise to adjust the pointer (output pressure) of the low-pressure gauge to 0.2~0.3Mpa.

5. Install the dispenser onto the draft beer barrel, rotate clockwise until it is tightened, press down on the dispenser handle, pull the six alcohol head handle forward to release the alcohol, and push the handle back to stop the alcohol release. When the draft beer machine is turned off, push the handle back to make beer foam, and then turn off the automatic reset.